Water alkalinity is one of the main factors that will influence the chemistry of your pool water. With a proper alkalinity range, we recommend 80 ppm to ppm, total alkalinity keeps the pH level stable. If your alkalinity level is too low, then your pool pH can fluctuate at the slightest addition of an acid or base.
Therefore, it is important to routinely perform tests; we recommend once a week. To raise your alkalinity is to firstly know the size of your pool and what your target alkalinity, within the range, will be be. When your alkalinity level is too low, we recommend Alkajuster , the alkalinity increaser from Club Pro.
Alkajuster is a chemical used to increase the level of alkalinity in your swimming pool. When using this product, broadcast it over the surface of your pool, preferably in the deep end.
If your alkalinity level becomes too high, it will become difficult to change the pH. The process of proper re-balancing your pool water alkalinity can take more than one week, so be patient with this one. If your pool alkalinity becomes too high, we recommend that you either consult a professional for detailed instructions or, use high quality Alkaline adjusting products. Maintaining the proper balance of chemicals in your pool is a continuous process.
Any new material that enters your pool such as debris, gardenia, oil, lotion, etc. In addition to pH, it is important to monitor total alkalinity, calcium hardness and total dissolved solids. Raising the pH level of a swimming pool is as easy as adding more alkaline materials. Soda ash and sodium bicarbonate are two common alkaline products that can be used to raise pH levels in a pool.
Remember that optimal pH levels for a swimming pool are between 7. If you overshoot it and need to bring your levels back down, read my guide on how to lower your pool pH level. As an Amazon Associate, we earn from qualifying purchases. Participation in these programs helps us keep the lights on at PoolResearch. What Is the pH in Your Pool? Chlorine works in two ways: It disinfects the water by killing bacteria and algae that cause waterborne illnesses.
Bacteria in pool water can cause swimmers to suffer from diarrhea, swimmers, ear infections, and skin infections. Chlorine also oxidizes or neutralizes dirt and debris particles that come into the water from swimmers and the environment. What Causes Low pH Levels Low pH levels lead to a number of issues from maintenance headaches like premature erosion of grout and corroded fixtures like ladders and diving boards. How to Raise pH Levels in Your Pool Maybe you have noticed something off with your pool water, or perhaps it was just time to test the water.
Add Soda Ash Soda ash is a strongly alkaline material that dissolves well in water and leaves behind a minimal amount of trace. Need Some Maintenance Help? Get Quotes. About The Author. Michael Dean Michael has over 25 years of experience in the swimming pool industry. Excessive acidity or alkalinity both impact the efficiency of the chlorine in your pool, and resultantly impede the process of disinfection.
On the pH scale, 0 is extreme acidity, with 14 representing extreme alkalinity. Now, before we show you how to raise the pH level in your pool, a few more basics so you can proceed better informed…. This describes the ability of a substance to attract ions of hydrogen. Well, opinion differs when it comes to the ideal pH, but estimates fall within the range of 7.
To avoid irritating swimmers and destroying pool equipment, keeping the pH level properly regulated is key. The first and most obvious adverse effect is the way this water will irritate your skin, nose, eyes, and mouth. Acidic water will also parch your hair and skin, as well as potentially causing itching. Low pH water will also eat into metal surfaces, as well as any metal pool accessories like ladders , pumps , filters , or heaters. Beyond this, acidic water will also cause plaster, concrete, and tiling to deteriorate prematurely.
It will into the grout and stone, too. As final insult, low pH water will minimize the effectiveness of the chlorine in your pool. This acid water can cause corrosion on the heat pump, thereby reducing its service life. The pH level of the water will also roughen the mosaic in the long term. This will put a great strain on your beautiful tiles. As the mosaic tiles become rougher they will also promote algae growth, which should be prevented at all costs.
Too low a pH level in the pool may cause those typical red eyes and even itching. It makes for a less pleasant swimming experience. Softer water, with a higher pH level, is much more pleasant!
The acid water will also adversely affect your swimming gear. Swimwear will wear faster and, over time, become subject to bleaching. The solution for too low a pH level is simply to add pH plus to the swimming pool.
Depending on the current pH level, you need to add a certain amount of pH plus.
0コメント